0

Process Control Lab Equipment

Showing 18 Items
ViewView
  1. Study Of P/I & Convertor

    I/P Convertor : Input : 4-20 mA DC output : 3-15 PSIG Pressure Gauge: Bourdon type 0-2 kg/cm2 P/I Convertor : Input : 0-1 bar Output:4-20 mA DC Digital Current Source/ Meter: Digital indication of current input and output Range 0-20 mA DC Pressure Regulator: 0-2 kg/cm2 piping: Size ¼An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the apparatus.The whole set-up is well designed and arranged on a rigid structure painted with industrial PU paint.An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the apparatus.The whole set-up is well designed and arranged on a rigid structure painted with industrial PU paint.SERVICES REQUIRED Electricity Supply: Single Phase , 220 V AC, 50 Hz, 5 Amp.Table for setup support.compressed air supply @ 2 CFM at 2 kg/cm2 pressure.
    Send Inquiry
  2. Level Control Trainer

    Level Transmitter : Range 0-300 mm, Capacitance Type, Output 4-20 mA Process tank : Material SS/Glass/Acrylic with Scale. Capacity 2 Ltr approx.Water Tank : Material Stainless Steel, Capacity 10 Ltrs.Water Circulation : FHP Pump. Tullu/Champion make.Flow Measurement : Rotameter.Control valve : Compatible capacity with pneumatic actuator.I/P converter : Input 4-20mA, Output 3-15 PSIG.Pressure Regulator : 0-2 kg/cm².Pressure Gauge : Bourdon type, 0-2 kg/cm²Piping : Size ¼”Interfacing unit :For input-output communication with auto/manual facility Micro-processor Controller :PID Setting, auto tuning, fully programmable with Serial Communication.: For experimentation, PID control, Data logging, trend plot, offline analysis and printing. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole unit is assembled rigidly on a base plate.SERVICES REQUIRED Water Supply.Compressed Air Supply: 1 CMH at 3 BAR.Electricity supply: 1 Phase, 220 VAC.Computer: Pentium IV, with CD Drive, Windows XP version XP pre-loaded. One RS 232 Serial communication port free for interfacing unit.Table for Setup support
    Send Inquiry
  3. INTERACTION AND NON-INTERACTION SYSTEM

    Process Tank: Material Stainless Steel, Circular, with level scale (3 Nos.)Capacity: 2.5 to 3.5 litres.Supply Tank: Material Stainless steel, Capacity 20 litres.Overhead tank: Material Stainless steel, Capacity 5 litres.Water Circulation: FHP Pump, Tullu/Standard make.Piping : SS/PVC, size ¼”Flow Measurement: Rotameter.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus.The whole unit is assembled rigidly on a base plate.Most of the parts are powder coated and rests are painted with auto paints.SERVICES REQUIRED Water supply Drain Electrical supply : 1 Phase, 220V AC, 0.5 kW.Table for set-up support.
    Send Inquiry
  4. Pressure Control Trainer

    Pressure Transmitter : Range 0-5 bar, type strain gauge, output 4-20 mA.Process Tank : Material Stainless Steel, Capacity 1.5 Ltrs. Powder Coated.Control Valve : Compatible capacity with Pneumatic Actuator.I/P converter : Input 4-20mA, Output 3-15 PSIG.Pressure Regulator : 0-2 kg/cm².Pressure Gauge : Bourdon type, 0-2 kg/cm² , 0-7 kg/cm².Piping : PU Piping.Interfacing unit : For input-output communication with auto/manual facility Micro-processor Controller : PID Setting, auto tuning, fully programmable with serial Communication.Software : For experimentation, PID control, Data logging, trend plot,offline analysis and printing Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus.SERVICES REQUIRED Compressed Air Supply : 1 CMH at 6 BAR.Electricity supply: 1 Phase, 220 VAC.Computer: Pentium IV, Windows XP version pre-loaded. One RS 232 Serial communication port free for interfacing unit.Table for Setup support.
    Send Inquiry
  5. TWO TANK NON-INTERACTION SYSTEM

    Process Tank: Material Stainless Steel, Circular, with level scale (2 Nos.)capacity 2.5 to 3.5 litres.Supply Tank : Material Stainless Steel, Capacity 20 litres.Overhead tank : Material Stainless Steel, Capacity 5 litres.Water Circulation : FHP Pump, Tullu/Standard make.Piping : SS 304, size ¼”Flow Measurement : Rotameter.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus.The whole unit is assembled rigidly on a base plate.Most of the parts are powder coated and rests are painted with auto paints.Water supply Drain Electrical supply : 1 Phase,220V AC, 0.5kw Stop Watch Table for set-up support.
    Send Inquiry
  6. TWO TANK INTERACTION SYSTEM

    Process Tank: Material stainless steel, Circular, with graduated level scale( 2 Nos.)capacity 2.5 to 3.5 liters..Supply Tank: Material stainless steel, capacity 20 liters.Overhead tank: Material stainless steel, capacity 5 liters.Water circulation: FHP pump, Tullu/ standard make.Piping: SS/PVC, size ¼’’Flow measurement : Rotameter Instruction Manual: An ENGLISH instruction manual will be provided along with the apparatus.The whole unit is assembled rigidly on a base plate.Most of the parts are powder coated and rest are painted with auto paints.SERVICES REQUIRED Water supply Drain Electrical supply : 1 Phase,220V AC, 0.5kw Stop Watch Table for set-up support.
    Send Inquiry
  7. MEASUREMENT OF LEVEL BY AIR PURGE METHOD

    Water Tank : Material Stainless Steel, Diameter 200 mm, Height 500 mm Air Purging valve : ¼’’ BSP Manometer : Type U Tube Manometer, Height 300 mm.Bubbler Pipe : Material Stainless Steel An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the apparatus.The whole set-up is well designed and arranged on a rigid structure painted with industrial PU paint.SERVICES REQUIRED Water Supply Floor Drain Manometer Fluid (CCI4) 50 ml.Compressed Air Supply: 1 CMH at 1 kg/cm2.Tablefor set-up support.
    Send Inquiry
  8. CALIBRATION OF THERMOCOUPLE

    Heat Source : Provide with ceramic insulation.Temp. Controller : Digital Temperature Controller. 0-200 degree Celsius Thermocouple : Standard 3 types /of thermocouple CR/AI Cu-constantan Fe-Constantan An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the apparatus.The whole set-up is well designed and arranged on a rigid structure painted with industrial PU paint.SERVICES REQUIRED Electricity Supply: 220 V AC, Single Phase, 0.5 kw.Table for set-up support.
    Send Inquiry
  9. TIME CONSTANT OF THERMOCOUPLES & THERMOMETER

    Heat Source : Provided with Ceramic insulation.Heater : Nichrome Wire Heater.Temp. Controller : Digital Temperature controller, 0 to 200°C ICE Pot : Compatible capacity.Thermometer : Glass Thermometer, Range 0-100°C.Thermocouple : Fe-Constantan type Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus.The whole unit is assembled rigidly on a panel plate.Most of the parts are powder coated and rests are painted with auto paints.SERVICES REQUIRED Electricity supply : 220 V AC, Single Phase, 0.5 kW.Table for set-up support.
    Send Inquiry
  10. TIME CONSTANT OF MANOMETER

    Manometer : Material Borosilicate Glass, U tube type, Height 1 m.pressure regulator : 0-2 kg/cm2 Stop Watch : Electronic An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the apparatus.The whole set-up is well designed and arranged on a rigid structure painted with industrial PU paint.SERVICES REQUIRED Constant compressed air supply at 1 CFM and pressure 2 to 3 kg/cm2.Table for set-up support.Manometer Fluid.
    Send Inquiry
  11. Temperature Control Trainer

    Temperature Transmitter : Input RTD PT-100 (0-100°C), output 4-20 mA.Process tank : Material Stainless Steel, Capacity 0.5 lit,Heater : Nichrome Wire Heater, Capacity1 Kw Thyristor Controller : Input 4-20mA for heater.Flow Measurement: Rotameter.Piping : Size 1/4”Interfacing unit : For input-output communication with auto/manual facility Micro-processor Controller : PID Setting, auto tuning, fully programmable with serial communication.Software : For experimentation, PID control, Data logging, trend plot, offline analysis and printing.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus.The whole unit is assembled rigidly on a base plate.SERVICES REQUIRED Water Supply 2 LPM.Electricity supply: 1 Phase, 220 VAC.Computer : Pentium IV with CD Drive, Windows XP version and MS Office XP pre-loaded. One RS 232 Serial communication port free for interfacing unit.Table for set-up support.
    Send Inquiry
  12. Flow Control Trainer

    DP Transmitter : Output 4-20 mA.Orificemeter : Material Stainless Steel.Water Circulation : FHP Pump Tullu/Champion make.Water Tank : Material Stainless Steel, Capacity 10 Ltrs.Flow Measurement : Rotameter.Control Valve : Compatible capacity with Pneumatic Actuator.I/P converter : Input 4-20mA, Output 3-15 PSIG Pressure Regulator : 0-2 kg/cm².Pressure Gauge : Bourdon type 0-2 kg/cm²Piping : Size 1/4”Interfacing unit : For input-output communication with auto/manual facility Micro-processor Controller : PID Setting, auto tuning, fully programmable with serial communication Software : For experimentation, PID control, Data logging, trend plot, offline analysis and printing.Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus The whole unit is assembled rigidly on a base plate.Services required Water Supply.Compressed Air Supply : 1 CMH at 3 BAR.Electricity supply: 1 Phase, 220 VAC.Computer: Pentium IV with CD Drive, Windows XP version and MS Office XP pre-loaded. One RS 232 Serial communication port free for interfacing unit.Table for Setup support.
    Send Inquiry
  13. CONTROL VALVE CHARACTERISTICS

    Water Supply.Control Valve Type : Pneumatic Size : ½”.Actuator : 15 Sq. Inch.Stroke : 14 mm.Input : 3-15 PSIG.Water Tank Material : Stainless Steel, capacity 25 litres Water Circulation : FHP Pump Tullu/Champion make.Overhead Tank Material : Stainless Steel, Capacity 10 Ltrs.Flow Measurement : Rotameter.Pressure Drop measurement : Using Manometer.Pressure Regulator : 0-2 kg/cm²Pressure Gauge : Bourdon type 0-2 kg/cm²Piping : Size ½”Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus.The whole assembly is housed in a good quality painted structure.Water Supply.Control Valve Type : Pneumatic Size : ½”.Actuator : 15 Sq. Inch.Stroke : 14 mm.Input : 3-15 PSIG.Water Tank Material : Stainless Steel, capacity 25 litres Water Circulation : FHP Pump Tullu/Champion make.Overhead Tank Material : Stainless Steel, Capacity 10 Ltrs.Flow Measurement : Rotameter.Pressure Drop measurement : Using Manometer.Pressure Regulator : 0-2 kg/cm²Pressure Gauge : Bourdon type 0-2 kg/cm²Piping : Size ½”Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus.The whole assembly is housed in a good quality painted structure.
    Send Inquiry
  14. CHARACTERISTICS OF P.I.D. CONTROLLER

    Stirred tank : Material stainless steel, capacity 2 Ltrs(approx.)stirrer : stainless steel ipeller and shaft coupled with FHP motor.Flow measureent : Rotameter Stop Watch : Electronic Heater : Nichrome wire heater Control Panel comprises of:- PID controller : 0-200 degree celsius Temperature Sensor:RTD PT-100 Type with standard make on/off switch, Mains indicator etc.An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the apparatus.The whole set-up is well designed and arranged on a rigid structure painted with industrial PU paint.SERVICES REQUIRED
    Send Inquiry
  15. DEAD WEIGHT PRESSURE GAUGE TESTER

    Precision ground plunger to develop the required.Valves Arrangement to fill oil.Pressure Gauge(Bourdon Type) of 7 kg/cm2.Weight set for the pressure of 0.5 to 7 kg/cm2.An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.The whole set-up is well designed and arranged on a rigid structure painted with industrial PU paint.SERVICES REQUIRED Space 0.5m * 0.5m at working height.SAE 40 20W40: 0.5 Ltr.
    Send Inquiry
Contact Us

Building No 80, Hsiidc Industrial Estate,, Ambala Cantt, Haryana, 133001, India
Phone :+918037402041