Mass Transfer Lab Equipment

Tower : Material Stainless Steel Size - Cross-Section 150x 150mm, Height 750mm Packing : Expanded wire mesh.Air Circulation : By forced draft fan, arrangement is done to vary the air flow rate.Air Flow Measurement : Orificemeter with U-tube manometer.Flow Measurement : Rotameter.Dry & Wet Bulb Temp. : Measured by Temperature Sensors.Hot Water Tank : Material Stainless Steel, Double wall,insulated with ceramic fibre wool Hot water circulation : Magnetic Pump Heater : Nichrome wire heater Temperature sensors : RTD PT-100 type 6 Nos.Control panel comprising of Digital Temp. Controller : 0-2000C, For hot water tank Digital Temp. Indicator : 0-199.90C, with multi-channel switch With Standard make On/Off switch, Mains Indicator & fuse etc.SERVICES REQUIRED Water Supply & Drain.Electricity Supply : 1 Phase, 220 V AC, 3 kW.Floor area of 1.2 m x 1m.

Drying Chamber : Insulated double wall chamber.Size 20 x 20 x 25cm Weighing Balance : Digital, 0-1000gm. of ± 1 gm resolution.Hot Air Circulation : By forced draft fan, Arrangement is done to vary the air flow rate.Heating Chamber : Compatible capacity.Heater : Nichrome wire heater.Control panel comprises of :Digital Temp. Indicator : 0-199.9° C (with multi-channel switch)Temperature Sensors : RTD PT – 100 Type Standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided Along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure SERVICES REQUIRED Electricity Supply : 1 Phase, 220 V AC, 2.5 kW.Wet Solid.Floor area 0.75 m x 2 m.

Column : Material Stainless Steel.Dia 80mm, Length 1000mm (approx.)One section of column is provided of Borosilicate glass to visualize the process Plates : Perforated Plates made of Stainless Steel (7 Nos.)Feed Circulation : By compressed air.Pressure Regulator : 0-2 kg/cm².Pressure Gauge : Bourdon type Feed Tank : Material Stainless Steel, Capacity 20 Ltrs.Flow Measurement : Rotameters (One each for feed, air & CO2).Collecting Tank : Material Stainless Steel, Capacity 10 Ltrs.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Compressed Air Supply at 2 Bar, 4 CFM.Water Supply Floor Drain.CO2 cylinder with control valve, pressure regulator and Pressure gauges Required Chemicals & Laboratory Glassware.

Extraction Column : Material Borosilicate Glass,Dia 55 mm, Height 750 mm (approx).Packing : Rasching Rings, Material Borosilicate Glass,Feed Tanks : Material Stainless Steel, Cap. 20 Ltrs. (2 Nos.)Extract & Raffinate Tanks : Material Stainless Steel, Cap 10 Ltrs.Feed Circulation : By Compressed Air.Pressure Regulator : 0-2 kg/cm2.Pressure Gauge : Bourdon type, 0-2 kg/cm2.Flow Measurement : Rotameters (One each for solvent & solute)Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Special arrangement for changing height of interface zone is done.The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Compressed Air Supply at 2 Bar, 0.5 CFM.Water Supply Drain.Required Chemicals & Laboratory Glassware.

Extraction Column Material : Borosilicate Glass Diameter : 45 mm (approx).Height : 750 mm (approx).Feed Tank Material : Stainless Steel Capacity : 20 Ltrs.Quantity : 2 Nos.Extract & Raffinate Tanks Material : Stainless Steel Capacity : 10 Ltrs.Quantity : 2 Nos.Feed Circulation : By Compressed Air Pressure Regulator : 0-2 kg/cm².Pressure Gauge : Bourdon type, 0-2 kg/cm2.Flow Measurement : Rotameters (One each for Solvent & Solute)Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Special arrangement for changing height of interface zone is done.The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Compressed Air Supply at 2 Bar, 0.5 CFM.Drain.Required Chemicals & Laboratory Glassware.

Specifications Extraction Column : Material Stainless Steel Dia 150 mm, Height 750 mm (approx)Plates: Material Stainless Steel, with Radial opening.Mixer: Stainless Steel Impellers fitted on Stainless Steel Shaft coupled to a motor & reduction gear box.Screw Conveyor: Material Stainless Steel, Compatible capacity, housed in GI Pipe and driven by a motor & reduction gear box.Solvent Flow Measurement: Rota meter.Solvent Tank: Made of Stainless Steel, Capacity 30 Ltrs. Double wall.Feed circulation: Magnetic Pump made of Polypropylene to Circulate solvent. Maximum working temperature is 60°C.Heater: Nichrome wire heater.Feed Hopper: Suitable capacity.Filtration Sieve: Material Stainless Steel.Receiving Tank for: Material Stainless Steel.Extracted solid waste: Compatible capacity.Temperature Sensor: RTD PT-100 type.Control panel comprising of:Digital Temp. Controller: 0-200°C, For Feed Tank Standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Electricity Supply : 1 Phase, 220 V AC, 3 kW.Solvent : 50 ltrs Solid : 30 kg.

Extraction Column: Material Borosilicate Glass Solvent Flow Measurement: Rotameter.Solvent Tank: Made of Stainless Steel, Capacity 30 Ltrs. Double wall.Solvent circulation: Magnetic Pump made of Polypropylene to Circulate solvent.Heater: Nichrome wire heater Temperature Sensor: RTD PT-100 Type.Control panel comprises of: Digital Temp. Controller: 0-199.9°C (For Hot Water Bath) With Standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole setup is mounted on a powder coated base plate SERVICES REQUIRED Electricity Supply :1 Phase, 220 V AC, 1.5 kW.Solvent: 30ltrs.Solid:10kg Table for setup support

SPECIFICATIONS Distillation Column : Material Stainless Steel, Dia 110mm, seven plates.Pressure Gauge : Bourdon type Rotameter : For cooling water flow rate measurement.Steam Generator : Made of Stainless Steel, provided with Pressure Gauge & Level Indicator, Safety valve & insulated with ceramic wool and Cladding with Aluminum foil.Reflux Divider : Special arrangement to change R/D ratio automatically.Condenser : Shell & Tube type made of Stainless Steel.Bottom product tank : Made of Stainless Steel, capacity 5 Ltrs.Distillate tank : Made of Stainless Steel, capacity 5 Ltrs.Heater : Nichrome wire heater.Temp. Sensors: RTD PT-100 type Control panel comprises of:Digital Temp. Controller : 0-199.9°C, For Reboiler.Digital Temp. Indicator : 0-199.9oC, with multi-channel switch With Standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the apparatus The whole set-up is well designed and arranged in a good quality painted structure SERVICES REQUIRED Water Supply 2 LPM at 5 m head.Drain.Electricity Supply: 1 Phase, 220 V AC, 6 kW.Required Chemicals Refractometer for analysis.

Specification Distillation Column : Material Stainless Steel ,Dia 110mm, seven sieve trays.Pressure Gauge : Bourdon type, 0-2 kg/cm2.Rotameter : For cooling water flow rate measurement.Steam Generator: Made of Stainless Steel, provided with Pressure Gauge & Level indicator, Safety valve & insulated with ceramic wool and cladding with Aluminium foil..Reflux Divider : Special arrangement to change R/D ratio automatically.Condenser : Shell & Tube type made of Stainless Steel.Bottom Product Tank : Made of Stainless Steel, capacity 5 Ltrs.Distillate Tank : Made of Stainless Steel, capacity 5 Ltrs.Heaters : Nichrome wire heater.Temp. Sensors : RTD PT-100 type Control panel comprises of :Digital Temp. Controller: 0-199.9°C, For Steam Reboiler Digital Temp. Indicator: 0-199.90C, with multi-channel switch With Standard make on/off switch, Mains Indicator etc.SERVICES REQUIRED Water Supply 2 LPM at 5m head.Drain.Electricity Supply : 1 Phase, 220 V AC, 6 kW.Required Chemicals.Refractrometer for analysis.

Specification Distillation Column : Material Stainless Steel ,Dia 80mm, Length 900mm (approx).Packing Material : Borosilicate Glass Rasching Rings.Pressure Gauge : Bourdon type Rotameter : For cooling water flow rate measurement.Steam Generator : Made of Stainless Steel, provided with Pressure Gauge & Level Indicator, Safety valve & insulated with ceramic wool and cladding with Aluminium foil.Reflux Divider : Special arrangement to change R/D ratio automatically.Condenser : Shell & Tube type made of Stainless Steel.Distillate tank : Made of Stainless Steel, capacity 5 ltrs Heaters : Made of Stainless Steel, capacity 5 ltrs: Nichrome wire heater.Temp. Sensors : RTD PT-100 type Control panel comprises of :Digital Temp. Controller : 0-199.9°C, (For Re-boiler)Digital Temp. Indicator : 0-199.90C, with multi-channel switch With Standard make on/off switch, Mains Indicator etc Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Water Supply 2 LPM at 5 m head.Electricity Supply: 1 Phase, 220 V AC, 6.5 kW.Required Chemicals.Refractometer for analysis

Flow measurement : Rotameter for cold water for condenser Distillation still : Made of Stainless Steel, capacity 5 ltrs. Insulated with ceramic wool and cladding with Aluminum foil.Condenser : Concentric Tube type made of Stainless Steel Distillate tank : Made of Stainless Steel, capacity 2 Ltrs.Heater : Nichrome wire heater.Control panel comprises of :Digital Temp. Controller : 0-199.9°C, RTD PT-100 type (For Steam Generator)Digital Temp. Indicator : 0-199.90C with multi-channel switch.Temp. Sensors : RTD PT-100 type With Standard make on/off switch, Mains Indicator Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Electricity Supply : 1 Phase, 220 V AC, 2 kW.Water Supply : Continuous @ 4 LPM at 1 Bar Floor Drain.Required Chemicals.

Column : Borosilicate Glass Dia 55 mm, Length 750 mm (approx.)Packing : Borosilicate Glass Rasching Ring Feed Circulation : By compressed air.Pressure Regulator : 0-2 kg/cm².Pressure Gauge : Bourdon type Feed Tank : Material Stainless Steel, Capacity 20 Ltrs.Flow measurement : Rotameters (One each for feed, air & CO2).Collecting Tank : Material Stainless Steel, Capacity 10 Ltrs.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Compressed Air Supply at 2 Bar, 4 CFM.Water Supply Floor Drain.CO2 cylinder with control valve, pressure regulator and Pressure gauges Required Chemicals & Laboratory Glassware

SPECIFICATIONS Column : Borosilicate Glass Dia 45 mm, Height 1000 mm (approx.)Feed Circulation : By compressed air.Pressure Regulator : 0-2 kg/cm².Pressure Gauge : Bourdon type Feed Tank : Material Stainless Steel, Capacity 20 Ltrs.Flow measurement : Rotameters (One each for feed, air & CO2).Collecting Tank : Material Stainless Steel, Capacity 10 Ltrs.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Compressed Air Supply at 2 Bar, 4 CFM.Water Supply Floor Drain.CO2 cylinder with control valve, pressure regulator and Pressure gauges Required Chemicals & Laboratory Glassware.

Tube : Material Borosilicate Glass.Water Bath : Material Stainless Steel with two sides made of glass Capacity 8 Ltrs, Fitted with heater and stirrer.Heater : Nichrome Wire Heater.Stirrer : Stainless Steel, Impeller and shaft coupled with FHP motor.Air Circulation : Air Pump.Traveling Microscope : 0-150 x 0.1 mm resolution.Temp. Sensor : RTD PT-100 type Control panel comprising of:Digital Temp. Controller cum-Indicator (For Water Bath 0-199.9°C and Standard make On/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is mounted on a powder coated base plate.SERVICES REQUIRED Electricity Supply : 1 Phase, 220 V AC, 0.6 kW.Required Chemicals & Laboratory Glassware.Table for setup support

Diffusion Column : Material Borosilicate Glass Air flow Measurement : By Rotameter.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is mounted on a powder coated base plate SERVICES REQUIRED Compressed Air Supply at 2 Bar, 4 CFM.Weighing Balance 0.01 gm resolution.Solid Spherical Balls of Naphthalene Table for setup support.

SPECIFICATIONS Drying Chamber Material : Stainless Steel Size : 30 x 30 x 30 cm insulated by Ceramic wool and housed in a MS Chamber.Maximum Temperature : 120°C.Heater : Nichrome wire heater Weighing Balance : Digital, 0-1000gm. of ± 1 gm resolution.Temp. Sensor : RTD PT-100 type Control panel comprises of:Digital Temp. Controller 0-199.9°C For Drying Chamber and with Standard make on/off switch, Mains Indicator etc.SERVICES REQUIRED Electricity Supply : 1 Phase, 220 V AC, 2 kW.Drying Solids.Table for setup support

Drying Shell : Material Stainless Steel, Length 1.5 m, Dia 110 mm.Feed Hopper : Material Stainless Steel , Compatible Capacity Product Receiver : Material Stainless Steel, Compatible Capacity.Rotating Action : Using motor coupled with a Reduction Gear Box.Hot Air Circulation : By forced draft fan, Arrangement is done to vary the air flow rate.Heating Chamber : Compatible capacity Heater : Nichrome wire heater Temperature Sensors : RTD PT-100 type.Control panel comprises of:Digital Temp. Controller : 0-199.9°C (For Hot Air)Standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure SERVICES REQUIRED Electricity Supply : 1 Phase, 220 V AC, 4 kW.Wet Solid.Floor space of 1.5m x 2m.

Column : Material Borosilicate Glass Dia. 80 mm. Total Length 500mm.Cyclone Separator : Material Stainless Steel, Compatible Capacity with collector.Air Circulation : By forced draft fan, Arrangement is done to vary the air flow rate.Heating Chamber : Compatible capacity Heater : Nichrome wire heater Temperature Sensors : RTD PT-100 type.Control panel comprises of :Digital Temp. Controller : 0 199.9°C(For Hot Air)Standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Electricity Supply : 1 Phase, 220 V AC, 3 kW.Granular and free flowing solid of size 1 to 2 mm.

Crystallizer (Jacketed Type) : Material Stainless Steel , Cap. 2 Ltrs. with conical bottom Stirrer : FHP, Variable Speed.Heater : Nichrome wire heater Cooling Water Tank : Material Stainless Steel , Capacity 30 litre fitted with Pump.Flow measurement : Rotameter for cooling water.Pump : FHP.Receiving Tank : Material Stainless Steel , Capacity 2 litre with SS sieve Temp. Sensors : RTD PT-100 type Control panel comprises of :Digital Temp. Indicator : 0-199.90C with multi-channel switch and Standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Water Supply.Drain.Electricity Supply : 1 Phase, 220 V AC, 1.5 kW.Required Chemicals.

Distillation still : 1 Ltrs. Capacity, made of Stainless Steel.Insulated by ceramic wool.Condenser : Concentric Tube type.Heater : Nichrome wire Cooling Water Tank : Material Stainless Steel , Capacity 15 Ltrs. Approx.Cold Water circulation : Using FHP Pump.Temperature Sensors : RTD PT-100 type Control panel comprising of Digital Voltmeter: 0-300 Volt.Dimmerstat : 0-230 V, 2A.Digital Temp. indicator: 0-199.90C RTD PT-100 Type with multi-channel switch With standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is mounted on a powder coated base plate.SERVICES REQUIRED Water Supply.Drain.Electricity Supply : 1 Phase, 220 V AC, 1.5 kW.Refractrometer for Analysis.Required Chemicals

Reactor : Material Stainless Steel, Capacity 2 Ltrs. (approx)Water Bath : Material Stainless Steel, Double Wall,nsulated with ceramic fibre wool.Heater : Nichrome Wire Heater Stirrer : Stainless Steel Impeller and shaft coupled with DC motor drive for variable speed.Temperature Sensors : RTD PT-100 type. Control panel comprises of :RPM Indicator : Digital, Non contact type. Digital Temp. Controller : 0-199.90C for hot water tank. With Standard make on/off switch, Mains Indicator & fuse etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The setup is provided with Peltilizer.The whole unit is assembled rigidly on a base plate.The whole setup is well designed and arrangement in a good quality painted structure.

Column (3 Nos.) : Material Borosilicate glass of different dia.Feed tank : Material Stainless Steel, Capacity 20 litres.Receiving tank : Material Stainless Steel, Capacity 20 litres.Feed circulation : FHP, Magnetic Pump made of Polypropylene.Piping : Stainless Steel and PVC of size ¼ .Flow measurement : Rotameter for feed.Stop Watch : Electronic.Instruction Manual : An ENGLISH instruction manual will be provided along wi th the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Electricity Supply : 1 Phase, 220 V AC, 0.5 kW Bench Area : 1.2m x 1m.Required Chemicals & Laboratory Glassware.Colourimeter. Required analyzing equipments as per the system to study