0

Heat transfer lab

ViewView
  1. Thermal Conductivity Of Metal Rod

     Metal Bar  Material: Copper  Length: 400 mm (approx.) Diameter: 25 mm Insulating shell  Length : 250 mm  Diameter : 200 mm Cooling Water Jacket  Length : 75 mm  Diameter : 100 mm  Heater: Nichrome Wire. Water Flow measurement: By Measuring cylinder  Control panel comprising of Digital Voltmeter: 0-300 Volt.Variac : 0-230 V, 2 Amps.Digital Temp. Indicator: 0-199.90C, with multi-channel switch, Temperature Sensors: RTD PT-100 type.With standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus  The whole setup is mounted on a powder coated base plate.
    Send Inquiry
  2. Thermal Conductivity Of Insulating Slab

    Specimen Diameter: 180 mm (approx).Thickness: 12 mm (approx).Central Heater: Dia 100 mm, sandwiched between copper plates.Ring Guard Heater: Width 35 mm, sandwiched between copper rings.Cooling chamber: Made of Aluminium for water circulation. 2 Nos.Insulation: Ceramic wool Control panel comprising of:Digital Voltmeter: 0-300 Volt.Digital Ammeter: 0-2 Amp Variac: 0-230 V, 2 Amps, (2 Nos.)One each for central & ring guard heater.Digital Temp. Indicator: 0199.90C, with multi-channel switch Temperature Sensors: RTD PT-100 type.With standard make on off switch, Mains Indicator etc.Instruction Manual: An ENGLISH instruction manual will be provided along With the Apparatus MS Cabinet to accommodate the slab assembly.The whole setup is mounted on a powder coated base plate
    Send Inquiry
  3. Heat Transfer through composite Wall

     Slab assembly arranged symmetrically on both sides of heater.Slab Material: Slab Size Cast Iron : 250 mm dia. & 20mm thick.Bakelite: 250 mm dia. & 15 mm thick.Press Wood : 250 mm dia. & 12 mm thick. Heater: Nichrome wire. Control panel comprising of Digital Voltmeter: 0-300 Volts.Digital Ammeter: 0-2 Amp.Variac : 0-230 V, 2Amp.Digital Temp. Indicator: 0-2000C, with multi-channel switch Temp. Sensors: RTD PT-100 type.With standard make On/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along  with the Apparatus  Cabinet to accommodate the slab assembly with front window of glass/acrylic. The whole set-up is mounted on a powder coated base plate
    Send Inquiry
  4. Heat Transfer through Lagged Pipe

     G.I. Pipe Inner: 5 cm dia. Approx. G.I. pipe middle: 10 cm dia. Approx. G.I. Pipe outer: 15 cm dia. Approx. Length of Pipes: 60 cm Approx. Heater : Nichrome Wire  Control panel comprising of:Digital Voltmeter: 0-300 Volt.Digital Ammeter: 0-2 Amp.Variac : 0-230 V, 2 Amp,Digital Temp. Indicator: 0-2000C, with multi-channel switch.Temperature Sensors: RTD PT-100 type.With standard make On/Off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus
    Send Inquiry
  5. Heat Pipe Demonstrator

    Pipes : 1st : Heat pipe made of stainless steel 2nd: Made of copper.3rd: Made of Stainless steel Size: 32mm dia, 350 mm length (Approx.)Heat Sink: Material Stainless steel.Working fluid in heat pipe: Distilled water.Heaters: Nichrome Wire Band Type.Control panel comprising of Digital Voltmeter: 0-300 Volts.Digital Ammeter: 0-2 Amp.Variac : 0-230 V, 4 Amp.Digital Temp. Indicator: 0-2000C, with multi-channel switch Temperature Sensors: RTD PT-100 type.With standard make on/ off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is mounted on a Powder Coated Base plate
    Send Inquiry
  6. Thermal Conductivity Of Insulating Powder

    Inner Sphere: Dia. - 100 mm.Outer Sphere : Dia. - 200 mm.Heater: Nichrome Wire.Control panel comprising of:Digital Voltmeter: 0-300 Volt.Digital Ammeter: 0-2 Amp.Variac: 0-230 V, 2 Amps.Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature Sensors: RTD PT-100 type.With standard make On/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is mounted on a power coated base plate
    Send Inquiry
  7. Thermal Conductivity Of Liquids

    Liquid Chamber: Dia 160 mm (approx).Heater: Dia 100 mm sandwiched between copper plates.Insulation : Ceramic Wool Cooling chamber: Made of Aluminium for water circulation.Control panel comprising of:Digital Voltmeter: 0-300 Volt.Digital Ammeter: 0-2 Amp.Variac : 0-230 V, 2 Amp.Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature Sensors: RTD PT-100 type.With standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Valves are provided for drain, charging & overflow line to make system flexible.MS Cabinet to accommodate the slab assembly.The whole setup is mounted on a powder coated base plate.
    Send Inquiry
  8. Heat Transfer Through Pin-fin Apparatus

    Fin: Pin type.Material: Brass.Size: 12.5 mm (approx.) 15 cm. long (approx.).Duct: Made of MS.Fan: Standard makes.Heater: Band type, Nichrome Wire.Control panel comprising of:Dimmerstat: 0-230 V, 2 Amp.Digital Temp. Indicator: 0-3000C, with multi-channel switch Temperature Sensors: RTD PT-100 type.5 for pin and 1 for duct temperature.With standard make On/Off switch, Mains Indicator etc.Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus The whole setup is mounted on a powder coated base plate.
    Send Inquiry
  9. Heat Transfer In Forced Convection Apparatus

    Test section : Horizontal, externally heated Diameter: 28 mm (approx.)Length: 400 mm (approx.)Blower: FHP of Standard makes.Heater: Nichrome Wire.Air Flow measurement: Orifice meter & Manometer.Control panel comprising of:Digital Voltmeter: 0-300 Volt.Digital Ammeter: 0-2 Amp.Variac: 0-230 V, 2 Amps Digital Temp. Indicator: 0-3000C, with multi-channel switch.Temperature Sensors: RTD PT-100 type.With standard make on off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts
    Send Inquiry
  10. Heat Transfer in Natural Convection

    Test Section Diameter: 38 mm (approx).Length: 500 mm (approx).Heater: Nichrome Wire.Control panel comprising of :Digital Voltmeter: 0-300 Volt.Digital Ammeter: 0-2 Amp.Variac: 0-230 V, 2 Amp.Digital Temp. Indicator: 0-3000C, with multi-channel switch Temperature Sensors: RTD PT-100 type. With standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Powder coated duct of MS to accommodate the assembly with front window of Acrylic.The whole set-up is well designed and arranged on a powder-coated structure
    Send Inquiry
  11. Emissivity Measurement Apparatus

    Table for set-up support.Test plate Diameter : 160 mm (approx.)Black Plate Dia. : 160 mm (Approx.)Heater (2Nos.): Nichrome Wire Heater.(One each for test plate & black plate)Control panel comprising of Digital Voltmeter. : 0-300 Volt.Digital Ammeter. : 0-2 Amps.DPDT Selector switches: For Digital Voltmeter & Digital Ammeter.Variacs: 0-230 V, 2 Amps, (2 Nos.)(One each for test plate and black plate).Digital Temp. Indicator: 0-3000C, with multi-channel Switch Temperature Sensors: RTD PT-100 type.With standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Cabinet to accommodate the slab assembly with front window of glass/acrylic.The whole set-up is mounted on a powder coated base plate.SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 4 Amp.
    Send Inquiry
  12. Stefan Boltzmann’s Apparatus

    Hemisphere : Dia.- 200 mm (approx.) made of Copper Jacket: Dia. 250 mm (approx.) made of Stainless Steel Test Disc Size : 20 mm Dia. x 1.5-mm thickness made of Copper Water Tank: Stainless steel 12 Ltrs. cap.Heater: Nichrome wire immersion heater.Control panel comprising of Digital Temp. Controller: 0 to 199.90C, (for water tank)Digital Temp. Indicator: 0 to 199.90C, with multi channel switch Temperature sensors: RTD PT-100 type.With standard make on/off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged on a powder-coated structure.SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 2 kW.Table for set-up support
    Send Inquiry
  13. Dropwise & Filmwise Condensation Apparatus

    Steam Generator : 8 Ltrs. (Approx.) made of Stainless steel with 1.5 kW heater. Insulated with ceramic wool and cladded by aluminum foil.Pressure Gauge : Bourdon type.Copper tubes (2 Nos.): one with natural finish and other nickel polished.Diameter: 19 mm (Approx.)Length: 170 mm (Approx.)Water Flow measurement: Rotameter.Condensate Measurement : Measuring Cylinder & Stopwatch Control valves: one each for Steam, Cooling water & Drain.Control panel comprising of :Digital Temp. Controller: 0- 199.90C (For Steam Generator)Digital Temp. Indicator: 0-199.90C, with multi-channel switch.Temperature Sensors : RTD PT-100 type.With Standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Water supply 5 lit/min (approx.)Electricity Supply: 1 Phase, 220 V AC, 1.5 kW.Table for set-up support.
    Send Inquiry
  14. Parallel & Counter Wise Flow Heat Exchanger

    System : Water to Water, concentric tube type Heat Exchanger: Length 1.6m (approx.). insulated with ceramic wool and cladded by aluminum foil.Outer Tube: Material Stainless steel. ID 27.5mm, OD 33.8 mm (approx)Inner Tube : Material Stainless Steel, OD 12.7mm (appx)Water Flow Measurement: Rotameters (2Nos.) one each for cold & hot fluid.Hot Water Tank: Made of Stainless steel. Insulated with ceramic fiber wool.Hot Water Circulation : Magnetic Pump Heaters : Nichrome wire heater (2Nos)Control panel comprising of Digital Temp. Controller: 0-199.90C (For Hot Water Tank)Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature Sensors: RTD PT-100 type.With Standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts.SERVICES REQUIRED Water supply 10 lit/min (approx.) and drain.Electricity Supply: 1 Phase, 220 V AC, 3 kW.Floor area 2 m x 0.6m
    Send Inquiry
  15. Shell & Tube Heat Exchanger

    System: Water to Water. (1 – 2 shell & tube type)Shell. : Material Stainless steel. Insulated with ceramic wool and cladded with aluminum foil.Dia. 220 mm, Length 500 mm (Approx.)25% cut baffles at 100 mm distance 4 Nos.Tube: OD 16mm approx., Length 500mm (24 Nos.)Water Flow Measurement: Rota meters (2Nos.) one each for cold & hot fluid.Hot Water Tank: Made of Stainless steel Insulated with ceramic fibre wool.Hot Water Circulation : Magnetic Pump Heaters: Nichrome wire heater (2 Nos.)Control panel comprising of:Digital Temp. Controller: 0-199.90C, (For Hot Water Tank)Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature sensors: RTD PT-100 type.With Standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts.SERVICES REQUIRED Water supply 20 lit/min (approx.) and drain.Electricity Supply: 1 Phase, 220 V AC, 4 kW.Floor area of 1.5 m x 0.75 m.
    Send Inquiry
  16. Finned Tube Heat Exchanger

    System : Water to Water, concentric tube type Inner Tube : Dia 32 mm approx., Length 500mm. (Made of Stainless Steel)Longitudinal Fins: Width 20mm, Length 500mm, 6 Nos. (Made of Stainless Steel)Water Flow Measurement : Rotameters for hot and cold fluid Hot Water Tank: Made of Stainless steel Double Wall, insulated with ceramic Wool.Hot Water Circulation: Magnetic Pump made of Polypropylene to circulate Hot water Maximum working temperature is 85°C.Heaters: 2 kW Nichrome wire heater (2 Nos.)Control panel comprising of:Digital Temp. Controller: 0-199.90C. (For Hot Water Tank)Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature sensors: RTD PT-100 type.With Standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 2 kW.Table for set-up support.
    Send Inquiry
  17. Vertical & Horizontal Condenser Apparatus

    System : Steam to Water Condensers: 2 Nos. (Vertical & Horizontal) Insulated by Ceramic wool and cladding by aluminium foil.Shell : Material stainless steel.Inner Dia 100 mm, Length 500 mm (Approx.)Tubes : OD 12.7mm, Length of tubes 500mm Condensate Measurement : Measuring Cylinder & Stopwatch Water Flow Measurement : Rotameter Steam Generator: Made of stainless steel fitted with level indicator, pressure gauge, safety valve, drain and insulated with ceramic wool & cladding with Aluminium foil.Heaters: Nichrome wire heater (2 Nos.)Control panel comprising of:Digital Temp. Controller: 0199.90C (For Steam Generator)Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature sensors: RTD PT-100 type.With Standard make On/Off switch, Mains Indicator etc.Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus A good quality painted rigid MS Structure is provided to support all the parts SERVICES REQUIRED Water supply 20 lit/min (approx.) and drain.Electricity Supply: 1 Phase, 220 V AC, 4 kW.Floor area of 1.5 m x 1m.
    Send Inquiry
  18. Heat Transfer in Agitated Vessel

    System : Steam to Water Vessel : Material stainless steel fitted with 4 baffles Dia. 250, Depth 350 mm (Approx.)Jacket : Width 25 mm. Insulated with ceramic wool and cladded with aluminium foil.Helical Coil: Material Copper, OD 16mm, ID 13mm.Agitator: Stainless steel Impeller fitted on a shaft coupled to a variable Speed motor and Drive.Condensate Measurement: Measuring Cylinder & Stopwatch Water Flow Measurement: Rota meter.Steam Generator: Made of stainless steel fitted with level indicator, pressure Gauge, safety valve, drain and insulated with ceramic wool & cladding with Aluminium foil.Heaters: Nichrome wire heater (2 Nos.)Control panel comprising of:Digital Temp. Controller: 0-199.90C (For Steam Generator)Digital Temp. Indicator: 0-199.90C, with multi-channel switch Temperature sensors: RTD PT-100 type.RPM Indicator: Standard makes Digital, Non Contact type. With standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Water supply 20 lit/min (approx.) and Drain.Electricity Supply : 1 Phase, 220 V AC, 5 kW
    Send Inquiry
  19. Unsteady State Heat Transfer Unit

    Water Bath: Material - stainless steel Capacity-8 lit. (Approx.)Stirrer for Bath: Stainless Steel Impeller with shaft coupled to a FHP motor.Heater : Nichrome wire heater Test Cylinder: One each of Stainless Steel & Brass.Control Panel comprises of :Digital Temperature Controller: 0-199.90C, (For Water Bath)Digital Temperature Indicator: 0-199.90C, Temperature Sensors: RTD PT-100 type With Standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 1 kW.Bench area of 1.5 m x 1.5 m.
    Send Inquiry
  20. Open Pan Evaporator

    Evaporator: Hemi-spherical, Jacketed type, made of stainless Steel insulated from outside. Dia. 300 mm approx.Steam Generator: Made of stainless steel, provided with Pressure Gauge & Level Indicator, Safety valve and drain etc. & insulated with ceramic Wool and cladding With Aluminium foil.Condensate Measurement: Using Measuring Cylinder & Stop watch.Temp. Measurement: By RTD Pt-100 Sensor Special arrangement to measure the evaporated volume of solvent is done.Control panel comprises of :Digital Temp/ Controller: 0-199.90C, (For Steam Generator)Digital Temp. Indicator: 0-199.90CWith Standard make On/Off switch, Mains Indicator etc.Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.SERVICES REQUIRED Water Supply.Drain.Electricity Supply : 1 Phase, 220 V AC, 5 kW.Required Chemicals
    Send Inquiry
  21. Single effect Evaporator

    Evaporator : Material stainless steel Shell Dia - 75mm, Length - 750mm,Tubes Dia - 12mm, Length - 750mm Feed Circulation : By Gravity feed Feed Tank: Material stainless steel, Capacity 25 Ltrs.Flow Measurement: Rotameters (One each for feed & cold water).Steam Generator: Made of stainless steel provided with Pressure Gauge & Level Indicator, Safety valve and drain etc. & insulated with ceramic wool and cladding with Aluminium foil.Piping: Stainless Steel and PVC, size ¼”.Condenser: Shell & Tube type made of Stainless Steel.Bottom Product Tank: Made of Stainless Steel, capacity 10 Ltrs.Water Supply Tank: Made of Stainless Steel, capacity 50 Ltrs. For condenser Pump : FHP capacity Heaters: Nichrome wire heater.Control panel comprises of Digital Temp. Controller: 0-199.90C, (For Steam Generator)Digital Temp. Indicator: 0-199.90C, with multi-channel switch.Temp. Sensors: RTD PT-100, Standard make On/Off switch, Mains Indicator etc.Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged on a good quality painted structure SERVICES REQUIRED Water supply 5 lit/min (approx.) and Drain.Electricity Supply: 1 Phase, 220 V AC, 4 kW.Required Chemicals.
    Send Inquiry
  22. Plate Type Heat Exchanger

    System : Water to Water Plates : Material Stainless Steel Frame : Rigid MS Structure Water Flow Measurement :By Rotameter (2Nos.) one each for cold & hot fluid.Hot Water Tank:Made of Stainless steel ,Double Wall, Insulated with ceramic wool.Hot Water Circulation: Magnetic Pump.Heaters : Nichrome wire heater.Control panel comprising of:Digital Temp. Controller: 0-199.9°C,(For Hot Water Tank)Digital Temp. Indicator : 0-199.9°C,withmulti-channel switch Temperature Sensors : RTDPT-100 type.-4Nos.With Standard make On/Off switch, Mains Indicator etc.An ENGLISH instruction manual consisting of experimental procedures ,block diagram etc .will be provided along with the Apparatus SERVICES REQUIRED Electricity Supply: 1 Phase, 220 V AC, 5 KW.Water Supply at constant head (10LPM Approx.)Floor Drain Floor area of 1.75m x 1m.
    Send Inquiry
Contact Us

Building No 80, Hsiidc Industrial Estate,, Ambala Cantt, Haryana, 133001, India
Phone :+918068210873