0

General Testing Lab Equipment

Showing 19 Items
ViewView
  1. WILEY MILL, HEAVY DUTY

    SPECIFICATIONS:The milling chamber is of 200mm. diameter x 75mm. deep. Four steel blades on the rotor. Act in conjunction with six steel blades on the frame.A hopper, provided for feeding the material, has a throat diameter of 14mm. Samples introduced through the hopper are swept around the rotor, until cut to sufficient fineness, to pass through the sieve top, and then on the delivery tube, which forms the bottom of the chamber.The mill is supplied with three standard size sieves of 0.5mm, 1mm. and 2mm.A glass jar plate forms the face of the chamber and permits observation during the operation. By removing the glass, access is possible for cleaning.Supplied complete with a glass receiver, a wrench for adjusting fixed blades and a cleaning brush., an electrical chord and plug. Wired for 440V. 50 Hz. 3ph.
    Send Inquiry
  2. WILEY MILL

    SPECIFICATIONS:It Consists of a polished cast iron chamber for 40mm. diameter x 22mm. deep, with two stationary blades. A rotor with four blades revolves at high speed, to provide a unique shearing action.A hopper, provided for feeding the material, has a throat diameter of 14mm. Samples introduced through the hopper are swept around the rotor, until cut to sufficient fineness, to pass through the sieve top, and then on the delivery tube, which forms the bottom of the chamber.• Three sieves of mesh sizes BSS20, 40 & 60 are supplied.• A glass jar, placed at the bottom, received the milled powder.• A glass jar plate forms the face of the chamber and permits observation during the operation. By removing the glass, access is possible for cleaning.• Supplied complete with a glass receiver, a wrench for adjusting fixed blades and a cleaning brush. Complete with a 0.25 HP motor, an electrical chord and plug. Wired for 230 V. 50 Hz. Sph.
    Send Inquiry
  3. HUMIDITY CONTROL OVEN DIGITAL DISPLAY (ENVIRONMENTAL TEST CHAMBERS)

    SPECIFICATIONS:Internal Dim.In cms. (HxWxD)Inner Chamb. Temp. Range 0 Accuracy = 1 C Humidity Range Accuracy +3%RH 0 0 between to 10 C to 60 C(a) 70x50x50 x Aluminum 10 C above 0 ambien to 60 C Ambiedn to 95%RH(b) -do- Stainless Steel -Do- -Do-(c) -do- Aluminum 10 Cl to 60 C 40% to 90%(d) -do- Stainless Steel -do- -do-(e) -do- -do- 0 C to 60 C
    Send Inquiry
  4. DIAL GAUGE

    SPECIFICATIONS:Available models:(a) 0.01 x 25mm,(b) 0.002 x 5mm(c) 0.01 x 50mm.
    Send Inquiry
  5. SOIL THERMOMETER

    SPECIFICATIONS:Soil thermometer are available in following sizes:- • 5cm long,• 10 cm long,• 15cm long • 230cm long.
    Send Inquiry
  6. TRAYS

    G.I. Trays Enamel Trays Approximate Size: Sizes available in inches are as Under: Under:(a) 6” x 6” (b) 8” x 8” (c) 10” x 12” (d) 12” x 12” (e) 12” x 14” (f) 12” x 18” (g) 18” x 18” (h) 18” x 24” (i) 24” x 24” (a) 6” x 6” (b) 8” x 8” (c) 10” x 12” (d) 12” x 12” (e) 12” x 14” (f) 12” x 18 (g) 18” x 18” (h) 18” x 24” (i) 24” x 24”
    Send Inquiry
  7. DEAD WEIGHT TESTERS

    SPECIFICATIONS:Dead Weight Tester • 2 Pressure Range: 6-75kg./cm.Dead Weight Tester • 2 Pressure Range: 100-550kg./cm.Dead Weight Tester • 2 Pressure Range: 600-800kg./cm.Dead Weight Tester • 2 Pressure Range: 800-1000kg./cm.
    Send Inquiry
  8. THERMOSTATIC HOT AIR OVEN (BOTTOM HEATING)

    SPECIFICATIONS:Inner chamber Shelves Wattage(a) 12” x 12” x 12”(b) 14” x 14” x 14”(c) 18” x 18” x 18”(d) 20” x 20” x 20”(e) 24” x 24” x 24”(f) 24” x 24” x 36” 1 2 2 3 3 3 800 1000 1500 2200 2500 3000
    Send Inquiry
  9. VISCOMETRIC WATER BATH

    SPECIFICATIONS:• Available in the following sizes and accessories :-(A) 12”L x 9” W x 7”H having rating of 750 W.,(B) 18” L x 12”W x 7”H having rating 1500W.• A glass window on side in water bath.
    Send Inquiry
  10. CONSTANT TEMPERATURE WATER BATH WITH CIRCULATING PUMP

    • Control panel for heaters, thermostat and circulating pump are provided on the outer wall at a convenient place, working size 37.5c, L x 30cm W x 25cm H. inside S.S.,. outside M.S. rating 2Kw, suitable for 230volts AC, single phase.
    Send Inquiry
  11. CONSTANT TEMPERATURE WATER BATH WITH CIRCULATING PUMP

    DESCRIPTION:• Run by a FHP motor and a contact thermometer to control accurately temperature within + .5 C, Heating is by permanent heater and one booster heater accommodated inside the reservoir.• Control panel for heaters, thermostat and circulating pump are provided on the outer wall at a convenient place, working size 37.5c, L x 30cm W x 25cm H. inside S.S.,. outside M.S. rating 2Kw, suitable for 230volts AC, single phase.
    Send Inquiry
  12. UNIVERSAL WATER BATH

    SPECIFICATIONS:Available in the following sizes and accessories :(a) 12”L x 9” W x 7”H having rating of 750 W.,(B) 18” L x 12”W x 7”H having rating 1500W.1. Pyramid lid for size(a) 12” L x 9” W x 7” H, (b) 18” L x 12”W x 7”H.
    Send Inquiry
  13. WATER BATH

    DESCRIPTION:• Rectangular water bath, double walled construction, inside reservoir of stainless steel, outer body mild steel with insulation in between, supplied with lid having one hole of 12.5cm dia. and four holes of 7.5cm dia.• Concentric Rings with lids are provided on holes.• The top plate and concentric rings are of S.S. Temperature 0 0 0 range 7 C above ambient to 95 C + 1 C by capillary thermostat, inside chamber size 30cm x 25cm x 12cm.• These water baths are useful for Laboratory work.• Thermometers at extra cost suitable for 230volts AC, ingle phase.
    Send Inquiry
  14. SCOOPS

    SPECIFICATIONS:Capacity available(a) 100gms,(b) 200gms,(c) 500gms(d) 1000gms.Scoops are made from G.I Sheet also available in above capacities.
    Send Inquiry
  15. LABORATORY OVEN

    • The heating if form bottom heaters made of nichrome wire, temperature range 50 C to 240 C accurately controlled within + 2 C thermostatically.• A three heat control switch provides faster initial heating. Suitable for operation on 230volts, A.C. single phase.
    Send Inquiry
  16. DIAL THERMOMETER

    SPECIFICATIONS:Following sizes are available:A. Range 0-300 C with 4” dial and 10mm dia. x 300mm long, S,S.Stem.B. Range 0-300 C with 2.1/2” dial and 6mm dia. x 180/200/300mm long, S.S. Stem.C. C. Range 0-100 C with 2.1/2” dial and 6mm dia. x 200mm long, S.S.Stem.
    Send Inquiry
  17. MEASURING TAPES

    SPECIFICATIONS:Steel Tape:(a) 15 meter, 13mm width,(b) 15 meter, 9.5mm width,(c) 30meter, 13mm width,(d) 30meter, 9.5mm width,(e) 3meter, 9.5mm width,(f) 5meter, with bubble, Metallic wire braided,(g) 15meter ,(h) 30meter.
    Send Inquiry
  18. LABORATORY THERMOMETER

    SPECIFICATIONS:Length of each Thermometer are 30cm in following range:1. 50 C 1/1,2. 110 C 1/1,3. 100 C 1/2,4. 150 C 1/1,5. 250 C 1/1,6. 360 C 1/1,7. 400 C 2/1,8. 220 F 1/1 and
    Send Inquiry
Contact Us

Building No 80, Hsiidc Industrial Estate,, Ambala Cantt, Haryana, 133001, India
Phone :+918037402041